Cleaning ability Foaming Hard water resistance An effective detergent for contactless washing, specially created to remove particularly stubborn dirt from both commercial and passenger vehicles. Designed for cleaning the body, tarpaulins, chassis, fuel tanks, engines, tankers, and long-haul trucks. It is optimal for removing dust, dirt, oil, fuel oil, and other road dirt. Thanks to special components, it works great in cold water and at low temperatures. Contains anti-corrosion additives. Composition: ≥30% water, ≥ 5%, but <15% anionic surfactants, nonionic surfactants, EDTA salt, sodium hydroxide, organic solvent, dye. Application method: Shake the canister. Before applying, the product must be diluted with water at a ratio of 1:5-1:8 (110-170 g) for a foam kit (1 L) or 1:60-1:100 (10-16 g/L) for a foam generator (25, 50, 100 L), depending on the degree of dirtiness. Cool the car body. If necessary, remove the top layer of dirt. Apply the diluted solution from bottom to top, avoiding runs. Leave for 1-2 minutes, without allowing it to dry! Rinse thoroughly with high-pressure water from a close distance (15-20 cm) from bottom to top.